• PET Nonwoven Reinforcing Fabric AFPET-SZD50B

    Nonwoven polyester (PET) reinforcing fabric supplied in roll form for cold-applied liquid waterproofing and roof coating systems. Embedded in the wet coating, it carries tensile load and bridges movement at seams, laps and detail work that the liquid film alone cannot span.

  • Fiberglass Reinforcing Mesh AFM – 9×9

    Open-weave fiberglass mesh reinforcement, designated 9×9, supplied in roll form for liquid-applied waterproofing and roof coating systems. Set into the wet coating, the glass yarn grid adds dimensional stability and crack-bridging strength at seams, penetrations and detail work.

  • Composite Fiberglass Tissue with Mesh ACTM – M3

    Composite fiberglass tissue laminated with a mesh scrim, designated M3, supplied in roll form for liquid-applied waterproofing and roof coating systems. The tissue face gives a smooth, uniform surface for the coating to wet out, while the mesh layer carries the tensile load and bridges movement at cracks and joints.

  • UV Stabilizer 234

    High molecular weight benzotriazole UV absorber, low volatility. Used in engineering plastics, coatings. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • UV Stabilizer 326

    Chlorinated benzotriazole UV absorber. Used in wood coatings, adhesives. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • UV Stabilizer 329

    Benzotriazole UV absorber, good solubility in nonpolar media. Used in polyolefins, coatings. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • UV Stabilizer P

    Benzotriazole UV absorber. Used in coatings, plastics. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • UV Stabilizer 119

    Oligomeric HALS light stabilizer. Used in polyolefins, fibers, agricultural film. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • UV Stabilizer 622

    Polymeric HALS light stabilizer, low volatility. Used in polyolefins, coatings. Sourced and supplied by ACSIC as part of the specialty raw materials portfolio.

  • Silyl-Terminated Polyether (M313)

    Silane end-capped polyether (SCP / STP hybrid polymer), endcapped with a dimethoxy(methyl)silyl methyl group (alpha effect) on a polypropylene oxide backbone — a different silane termination from the trimethoxysilyl chemistry. Isocyanate-free, cures via atmospheric moisture, paintable after cure, resistant to UV and weathering, and, compared with silicone sealants, resists staining and picks up less dirt.…

Powered by CookieAdmin