-
HCR Silicone Rubber TYS771-70 — General Purpose Molding / Peroxide
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Hard grade for structural parts, rollers and high-pressure seals at 71 Shore A.
-
HCR Silicone Rubber TYS771-50 — General Purpose Molding / Peroxide
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Soft to medium grade for seals, membranes and flexible profiles at 41 Shore A.
-
HCR Silicone Rubber TYS771-40 — General Purpose Molding / Peroxide
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Medium-hard general-purpose grade, the most widely used hardness range at 54 Shore A.
-
HCR Silicone Rubber TYE771-70G — Low Compression Set
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Hard grade for structural parts, rollers and high-pressure seals at 76 Shore A. Selected for static and dynamic seals that must recover their shape after long-term compression.
-
HCR Silicone Rubber TYE771-70AP — Low Compression Set
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Hard grade for structural parts, rollers and high-pressure seals at 73 Shore A. Selected for static and dynamic seals that must recover their shape after long-term compression.
-
HCR Silicone Rubber TYE771-60AH — Low Compression Set
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Medium-hard general-purpose grade, the most widely used hardness range at 61 Shore A. Selected for static and dynamic seals that must recover their shape after long-term compression.
-
HCR Silicone Rubber TYE771-40G — Low Compression Set
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Soft to medium grade for seals, membranes and flexible profiles at 44 Shore A. Selected for static and dynamic seals that must recover their shape after long-term compression.
-
HCR Silicone Rubber TYB171-70 — Specialty — Oil Resistant
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Hard grade for structural parts, rollers and high-pressure seals at 72 Shore A. Retains properties on contact with mineral and synthetic oils.
-
HCR Silicone Rubber TYA151-60 — Specialty — Steam Resistant
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Medium-hard general-purpose grade, the most widely used hardness range at 63 Shore A. Resists hot water and saturated steam without reversion.
-
HCR Silicone Rubber TY971-90 — General Purpose Molding / Peroxide
High-consistency silicone rubber (HCR / solid silicone gum) supplied ready to mill, calender and process by compression and injection molding, using peroxide cure. Hard grade for structural parts, rollers and high-pressure seals at 90 Shore A. Reinforced with fumed silica, giving a higher 8.0 MPa tensile strength, 100% elongation and 20 kN/m tear strength than…