• Silicone Emulsion, Silanol Terminated (OH42A)

    High-viscosity aqueous emulsion of silanol-terminated polydimethylsiloxane. Carries the release and lubricity of the base silanol-terminated fluid in water, for use where a solvent-free, water-dilutable release or finishing agent is needed.

  • Vinyl Terminated Methyl Silicone Fluid AC-MV205C

    Vinyl terminated polydimethylsiloxane — the base polymer of addition (platinum) cure silicone elastomers, gels and encapsulants. Supplied at 50 – 500 cSt.

  • Vinyl Terminated Methyl Silicone Fluid AC-MV205B

    Vinyl terminated polydimethylsiloxane — the base polymer of addition (platinum) cure silicone elastomers, gels and encapsulants. Supplied at 50 – 50,000 cSt.

  • Vinyl Terminated Methyl Silicone Fluid AC-MV205A

    Vinyl terminated polydimethylsiloxane — the base polymer of addition (platinum) cure silicone elastomers, gels and encapsulants. Supplied at 18 – 80,000 cSt.

  • Vinyl Fluoro Silicone Oil

    Fluorosilicone fluid. The trifluoropropyl group gives resistance to fuels, oils and non-polar solvents that ordinary PDMS does not have. Supplied at 400 – 500 mPa.s.

  • Phenyl Vinyl Silicone Oil

    Phenyl vinyl silicone fluid used as the base polymer of high refractive index addition-cure encapsulants. Supplied at 2,000 – 10,000 mPa.s.

  • Phenyl Hydrogen Silicone Oil

    Phenyl hydrogen functional silicone fluid. Acts as crosslinker in addition-cure systems while raising the refractive index of the cured matrix. Supplied at 200 mPa.s.

  • Methyl Phenyl Silicone Oil AC-PM2575

    Methyl phenyl silicone fluid. The phenyl content raises the flash point and thermal stability well above standard PDMS and improves low-temperature behavior. Supplied at 50-80 cSt.

  • Methyl Phenyl Silicone Oil AC-PM2515

    Methyl phenyl silicone fluid. The phenyl content raises the flash point and thermal stability well above standard PDMS and improves low-temperature behavior. Supplied at 110-200 cSt.

  • Methyl Phenyl Silicone Oil AC-PM2030

    Methyl phenyl silicone fluid. The phenyl content raises the flash point and thermal stability well above standard PDMS and improves low-temperature behavior. Supplied at 25-40 cSt.

Powered by CookieAdmin